In short: cut the capsule, center the tool on the cork, pull it straight out, then wipe the neck. With an electric corkscrew, it's done in a few seconds.
With an electric corkscrew
- Remove the capsule around the neck with a capsule cutter or a small knife.
- Place the corkscrew vertically on the neck (90°).
- Press the extraction button: the cork rises on its own.
- Tilt the device at 45° and press the release button to drop the cork.
With a classic corkscrew
- Cut the capsule below the ring of the neck.
- Push the screw well into the center of the cork, without going through.
- Pull slowly and straight. Finish by hand to avoid the "pop".
Mistakes to avoid
- Screw in crookedly: the cork crumbles.
- Pull too fast: wine can spray.
- Forget to wipe the neck: small debris can fall into the glass.
To open effortlessly, discover the Optimiron electric corkscrew.